​

All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.

 

TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

​

TO USE: 

1) Insert into cartridge gun.

2) Apply sealant, pushing bead ahead of nozzle.

3) Smooth bead immediately after application, before skin forms.

Storage: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.

Clean-Up: 

Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.